Parts to modify car

These are the parts that you’ll use to assemble a Go Baby Go! car.

General parts and supplies

• 3/4” black vinyl electrical tape

Master switch parts

• SPST on/off toggle switch
• 18-24 ga Posi-lock wire splices (2x)
• 16-18 ga Posi-tap wire splices (2x)
• 18-ga duplex wire (red/black) 18” long with 3” of sheath removed from each end
• 4” wire ties (4x)

Steering wheel “GO” button parts

• Large red push button with SPDT illuminated switch
• 100 uF electrolytic capacitor
• 1/2” double-sided foam tape (12”)
• 1/4” male spade terminal for 18-22 ga wire (2x)
• 1/4” female spade terminal for 18-22 ga wire (2x)

Support cage parts

This is a list of suggested parts and supplies to have on hand. Each car will use different amounts of different parts as recommended by the therapist who is assisting with the customization.