Tools to assemble car

These are the tools that you’ll need to assemble a Go Baby Go! car.

Tools used to assemble car

The numbers refer to the following photo.

1. Magnetic parts collection cup
2. Screwdriver adapter for drill and screwdriver tips
3. 1/4” x 6” flat-tip screwdriver
4. Step-drill bit (that makes at least 1” diameter hole)
5. #1 Phillips screwdriver
6. 3/8” variable-speed drill (cordless, preferred)
7. Wire strippers (that support stripping 12 - 18 AWG wire)
8. Crimping tool
9. Drill bits (1/8”, 1/4” required for this project)

Required tools not shown in the photo

• #2 Phillips screwdriver
• Wire cutters
• 6” adjustable “Crescent” wrench
• Multimeter
• Scissors

Tools used to assemble support cage

• PVC cutoff tool
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• 1/4” x 6” flat-tip screwdriver
• 6” adjustable “Crescent” wrench
• Scissors
• 3/8” Variable-speed drill (cordless, preferred)
• Drill-bit set
• Utility knife
• Flat-file set
• 9” or 12” Hacksaw