Maserati - Task 9

Complete the steering wheel

This task is easier with two people.

Note that this is only required for cars that will be operated by hand.

Procedure

Replace the remaining eight (8) screws in the steering wheel (4 in the center and 4 around the ring) and tighten them with a Phillips screwdriver.

Use the multimeter to test the wiring.

On the multimeter, select “Ohms” (or continuity). This is usually indicated by the Greek letter omega (Ω) for Ohms.
Place the red lead of the meter on the metal terminal of the red wire.
Place the black lead of the meter on the metal terminal of the black wire.
With both leads touching their respective terminals as shown in this photo.
1. The meter should not show continuity.
2. Press the large red push button, and the meter should indicate continuity (by showing zero or almost zero ohms or beeping).

After you confirm that steering wheel is completely assembled and that the wiring is correct, you can continue to the next task.